Cisco 1 Net Fun practice final Final 3

Last Updated By FunnelBrain1 on 05/17/2013
32 people took this quiz
  • Share
http%3A%2F%2Fwww.funnelbrain.com%2Fqc-188990-when-must-a-router-serial-interface-be-configured-with-the-clock-rate-command.html

Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?

Answer:
Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?
a)
Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?
b)
Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?
c)
Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?
d)
View as Flashcard Quiz
Related Quiz Content
  • FunnelBrain1
    Refer to the exhibit. Host A is unable to reach host B on the remote network. A technician attempted to ping the local gateway and the ping was successful. To verify the host configuration, the technician issued the ipconfig command. What is the likely cause of the problem?
    Refer to the exhibit. Host A is unable to reach host B on the remote network. A technician attempted to ping the local gateway and the ping was successful. To verify the host configuration, the technician issued the ipconfig command. What is the likely cause of the problem?
    a)The local NIC is incorrectly configured.
    b)The subnet mask on host A is incorrectly configured.
    c)The IP address on host A is incorrectly configured.
    d)The default gateway on host A is incorrectly configured.
    d)The default gateway on host A is incorrectly configured.
  • FunnelBrain1
    A network administrator is configuring several switches for a network. The switches have similar configurations and only minor differences. The administrator wants to save all commands that are issued on the first switch to a text file for editing. Which transfer option should be selected in HyperTerminal?
    a)A network administrator is configuring several switches for a network. The switches have similar configurations and only minor differences. The administrator wants to save all commands that are issued on the first switch to a text file for editing. Which transfer option should be selected in HyperTerminal?
    b)A network administrator is configuring several switches for a network. The switches have similar configurations and only minor differences. The administrator wants to save all commands that are issued on the first switch to a text file for editing. Which transfer option should be selected in HyperTerminal?
    c)A network administrator is configuring several switches for a network. The switches have similar configurations and only minor differences. The administrator wants to save all commands that are issued on the first switch to a text file for editing. Which transfer option should be selected in HyperTerminal?
    d)A network administrator is configuring several switches for a network. The switches have similar configurations and only minor differences. The administrator wants to save all commands that are issued on the first switch to a text file for editing. Which transfer option should be selected in HyperTerminal?
    c)A network administrator is configuring several switches for a network. The switches have similar configurations and only minor differences. The administrator wants to save all commands that are issued on the first switch to a text file for editing. Which transfer option should be selected in HyperTerminal?
  • FunnelBrain1
    How many host addresses may be assigned when using the 128.107.0.0 network address with a subnet mask of 255.255.248.0?

    a)30
    b)256
    c)2046
    d)2048
    e)4094
    f)4096
    c)4096
  • FunnelBrain1
    Which application layer protocol allows administrators to log into a server from remote locations and control a server as though logged in locally?
    a)DNS
    b)FTP
    c)DHCP
    d)STP
    e)Telnet
    e)Telnet
  • FunnelBrain1
    During the encapsulation process, what is the PDU of the internet layer?
    a)bit
    b)data
    c)frame
    d)packet
    e)segment
    d)segment
  • FunnelBrain1
    Which service is used when the nslookup command is issued on a computer?
    a)FTP
    b)DNS
    c)DHCP
    d)Telnet
    b)Telnet
  • FunnelBrain1
    Refer to the exhibit. A network technician creates equal-sized subnets of network 192.168.2.0/24 using the subnet mask 255.255.255.224. If the technician wishes to calculate the number of host addresses in each subnet by using the formula that is shown in the exhibit, what value will be used for n?
    Refer to the exhibit. A network technician creates equal-sized subnets of network 192.168.2.0/24 using the subnet mask 255.255.255.224. If the technician wishes to calculate the number of host addresses in each subnet by using the formula that is shown in the exhibit, what value will be used for n?
    a)1
    b)2
    c)3
    d)4
    e)5
    e)5
  • FunnelBrain1
    What are the default terminal emulation software settings when configuring a Cisco device through a console port?
    a)Bits per second: 19200 Data bits: 7 Parity: None Stop bits: 0 Flow control: None
    b)Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None
    c)Bits per second: 19200 Data bits: 7 Parity: None Stop bits: 0 Flow control: Hardware
    d)Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: Hardware
    b)Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: Hardware
  • FunnelBrain1
    In a packet-switched data network, what is used to reassemble the packets in the correct order at the destination device?
    a)source address
    b)sequence number
    c)priority assignment
    d)destination address
    b)destination address
  • FunnelBrain1
    Refer to the exhibit. A network administrator tries to test the connectivity between routers R1 and R2, but the attempt to ping is unsuccessful. Based on the show ip interface brief command outputs, what could be the possible cause of the problem?
    Refer to the exhibit. A network administrator tries to test the connectivity between routers R1 and R2, but the attempt to ping is unsuccessful. Based on the show ip interface brief command outputs, what could be the possible cause of the problem?
    a)Interface S0/0/0 on router R1 is shut down.
    b)Interface S0/0/0 on router R1 is configured with an incorrect IP address.
    c)Interface S0/0/0 on router R2 is administratively down.
    d)Interface S0/0/0 on router R2 does not have the clock rate settings configured.
    b)Interface S0/0/0 on router R2 does not have the clock rate settings configured.
Discussion Board
Cisco 1 Net Fun practice final Final 3
Cisco 1 Net Fun practice final Final 3
Quiz Taken:32 people took this quiz
Rate this Quiz
Teams
Quiz does not belong to any team.
Quiz Tags
Tags not available.
Others Studying this Quiz
Free Quiz Question From Cisco 1 Net Fun practice final Final 3
Question: Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?
Answer:
Photo answer
Photo answer
Photo answer
Photo answer