FAA Knowledge Test

Last update by Bruno on 11/06/2014
1105082 People have viewed this Quiz
  • Share

When should pilots state their position on the airport when calling the tower for takeoff?

Answer:
When departing from a runway intersection.

View FAA Knowledge Test as Flashcard Deck

Related Quiz Content
  • soonertsmith
    Answered in FAA Knowledge Test
    The normal radius of the outer area of Class C airspace is...
    20 nautical miles
  • soonertsmith
    Answered in FAA Knowledge Test
    All operations within Class C airspace must be in...
    an aircraft equipped with a 4096-code transponder with Mode C encoding capability.
  • soonertsmith
    Answered in FAA Knowledge Test
    The vertical limit of Class C airspace above the primary airport is normally...
    4,000 Ft AGL
  • soonertsmith
    Answered in FAA Knowledge Test
    Under what condition may an aircraft operate from a satellite aiport within Class C airspace?
    The pilot must contact ATC as soon as practicable after takeoff.
  • soonertsmith
    Answered in FAA Knowledge Test
    Which initial action should a pilot take prior to entering Class C airspace?
    Contact approach control on the appropriate frequency.
  • soonertsmith
    Answered in FAA Knowledge Test
    TRSA Service in the terminal radar program provides...
    sequencing and separation for participating VFR aircraft.
  • soonertsmith
    Answered in FAA Knowledge Test
    From whom should a departing VFR aircraft request radar traffic info during ground operations?
    Ground control or initial contact
  • soonertsmith
    Answered in FAA Knowledge Test
    Basic radar service in the terminal radar program is best described as...
    safety alerts, traffic advisories, and limited vectoring to VFR aircraft.
  • soonertsmith
    Answered in FAA Knowledge Test
    If Air Traffic Control advises that radar service is terminated when the pilot is departing Class C airspace, the transponder should be set to code...
    1200 (The code 1200 designates VFR operations when another number is not assigned by ATC)
  • soonertsmith
    Answered in FAA Knowledge Test
    When making routine transponder code changes, pilots should avoid inadvertent selection of which codes?
    7500, 7600, 7700.
  • soonertsmith
    Answered in FAA Knowledge Test
    When operating under VFR below 18,000 ft MSL, unless otherwise authorized, what transponder codes should be selected?
    1200