FAA Knowledge Test

Last update by Kylee on 02/17/2014
1046016 People have viewed this Quiz
  • Share

The most effective method of scanning for other aircraft for collision avoidance during daylight hours is to use...

Answer:
a series of short, regularly spaced eye movements to search each 10 degree sector.

View FAA Knowledge Test as Flashcard Deck

Related Quiz Content
  • soonertsmith
    Answered in FAA Knowledge Test
    The most effective method of scanning for other aircraft for collision avoidance during nighttime hours is to use...
    peripheral vision by scanning small sectors and utilizing offcenter viewing.
  • soonertsmith
    Answered in FAA Knowledge Test
    How can you determine if another aircraft is on a collision course with your aircraft?
    There will no apparent relative motion between you and the other aircraft.
  • soonertsmith
    Answered in FAA Knowledge Test
    Prior to starting each maneuver, pilots should...
    visually scan the entire area for collision avoidance.
  • soonertsmith
    Answered in FAA Knowledge Test
    What procedure is recommended when climbing or descending VFR on an airway?
    Execute gentle banks, left and right for continuous visual scanning of the airspace.
  • soonertsmith
    Answered in FAA Knowledge Test
    What procedure is recommended when climbing or descending VFR on an airway?
    Execute gentle banks, left and right for continuous visual scanning of the airspace.
  • soonertsmith
    Answered in FAA Knowledge Test
    Responsibility for collision avoidance in an alert area rests with...
    all pilots.
  • soonertsmith
    Answered in FAA Knowledge Test
    Most midair collision accidents occur during...
    clear days.
  • soonertsmith
    Answered in FAA Knowledge Test
    Pilots are encouraged to turn on their landing lights when operating below 10,000 feet, day or night, and especially when operating...
    in conditions of reduced visibility.
  • soonertsmith
    Answered in FAA Knowledge Test
    After landing at a tower-controlled airport, when should the pilot contact ground control?
    When advised by the tower to do so.
  • soonertsmith
    Answered in FAA Knowledge Test
    If instructed by ground control to taxi to Runway 9, the pilot may proceed...
    to the next intersecting runway where further clearance is required.

    A taxi clearance from ATC authorizes the pilot to utilize taxiways along the taxi route, but a specific crossing clearance must be issued for all runways along the route.

    ("via taxiways and across runways to, but not onto, runway 9." used to be correct, but the FAA changed this to help prevent runway incursions.)