FAA Knowledge Test

Last update by Bruno on 11/06/2014
1128503 People have viewed this Quiz
  • Share

An airplane has been loaded in such a manner that the CG is located aft of the CG limit. One undesirable flight characteristic a pilot might experience with this airplane would be...

Answer:
difficulty in recovering from a stalled condition.

View FAA Knowledge Test as Flashcard Deck

Related Quiz Content
  • soonertsmith
    Answered in FAA Knowledge Test
    What causes an airplane (except a T-tail) to pitch nosedown when power is reduced and controls are not adjusted?
    The downwash on the elevators from the propeller slipstream is reduced and elevator effectiveness is reduced.
  • soonertsmith
    Answered in FAA Knowledge Test
    Loading an airplane to the most aft CG will cause the airplane to be...
    less stable at all speeds.
  • soonertsmith
    Answered in FAA Knowledge Test
    In what flight condition is torque effect the greatest in a single-engine airplane?
    Low airspeed, high power, high angle of attack
  • soonertsmith
    Answered in FAA Knowledge Test
    Loading an airplane to the most aft CG will cause the airplane to be...
    less stable at all speeds.
  • soonertsmith
    Answered in FAA Knowledge Test
    The left turning tendency of an airplane caused by P-factor is the result of...
    the propeller blade descending on the right, producing more thrust than the ascending blade on the left.
  • soonertsmith
    Answered in FAA Knowledge Test
    When does P-factor cause the airplane to yaw to the left?
    When at high angles of attack
  • soonertsmith
    Answered in FAA Knowledge Test
    The weight of an object is related to the earth's gravitational pull
    speed of the airplane.
  • soonertsmith
    Answered in FAA Knowledge Test
    Which basic flight maneuver increases the load factor on an airplane as compared to straight-and-level flight?
    Turns.
  • soonertsmith
    Answered in FAA Knowledge Test
    During an approach to a stall, an increased load factor will cause the aircraft to...
    stall at a higher airspeed.
  • soonertsmith
    Answered in FAA Knowledge Test
    How do you find the weight an airplane structure is required to support during a banked turn while maintaining altitude?
    Multiply the weight of the airplane times the load factor (n) which can be found on a graph that will be given. The load factor corresponds to the angle of bank.
  • soonertsmith
    Answered in FAA Knowledge Test
    During an approach to a stall, an increased load factor will cause the aircraft to...
    stall at a higher airspeed.